The road at a railroad crossing: surface, angle, lanes, speed limit and road class in the federal inventory

By Tan Solutions · Published · Updated · 9 min readHow notes are written and corrected

What Parts IV and V of a crossing record say about the road itself, from the surface and the angle to the speed limit and the road class, and how complete those fields are.

A crossing record describes the road as well as the railroad. For a public highway crossing, the federal inventory says what the crossing surface is made of, at what angle the road meets the track, how many lanes cross, what the speed limit is and what kind of road it is. Most of these fields are well filled. A few, such as the year the surface was laid, are almost always blank. This note takes each field in turn: what the form asks and what the national counts show.

The figures come from the FRA dataset, data updated 18 November 2026, queried 19 November 2026. They are drawn differently from the site-wide count of 203,136 open crossings at track level in the inventory of 3 November 2026, so the totals differ slightly. Every count below is out of the 124,279 open public highway crossings at track level in that reading.

Two parts of the record describe the road

The U.S. DOT Crossing Inventory Form, Form FRA F 6180.71, has five numbered parts. Part I places the crossing and names the railroad. Part II describes the railroad side, and Part III lists the signs and signals. The road is in the last two parts:

  • Part IV, physical characteristics, items 1 to 8: lanes, paving, street running, lighting, the surface, a nearby road and the angle.
  • Part V, public highway information, items 1 to 10: the road's system and class, the speed limit, the traffic count and the traffic that uses the road.

The form's instructions say who fills these parts in. Public highway crossings complete the entire form. Private highway crossings and all pathway crossings complete only the header, Parts I and II and the submission section. So Parts III to V describe public highway crossings, and no figure in this note applies to a private crossing. In this reading there are 124,279 public highway records. The other open public records at track level are 1,268 pathway crossings and 551 station pedestrian crossings. See public and private railroad crossings for how the type is decided.

What the crossing surface is made of

Item IV.5 records the crossing surface: the material that carries the road over the rails. The form offers ten types and allows more than one on the main track. The dataset keeps the first type listed in its own column. For public highway crossings:

Crossing surface, first type listed (IV.5), open public highway crossings at track level, in alphabetical order
Surface typeRecordsPercent
Asphalt32,91126.5
Asphalt and timber20,03216.1
Composite3550.3
Concrete33,03026.6
Concrete and rubber3,2782.6
Metal810.1
Other1,2031.0
Rubber3,6142.9
Timber24,69719.9
Unconsolidated4,5943.7
Blank4840.4

Concrete and asphalt each account for about a quarter of the records. Timber alone accounts for about a fifth, and asphalt with timber for about a sixth, so timber appears in more than a third of the first-listed types. Another 4,820 records list a second surface type as well.

The form also asks when the surface was installed, but it marks that item optional. Only 7,829 records (6.3 percent) carry a year: 1,393 in the 2020s, 3,631 in the 2010s, 2,213 in the 2000s, 470 in the 1990s and 122 before 1990. The field is blank on 111,796 records (90.0 percent). Another 4,505 hold the value "1", 61 hold "0" and 88 hold other values that are not years. So the record almost never tells you how old a surface is.

The record does follow changes. Under 49 CFR 234.411, a change in the crossing surface at a public crossing must reach the inventory within three months. That rule covers changes made on or after 10 June 2016. To see when a record was last revised, read the revision date in its header, as the note on reading a crossing record, field by field explains.

The angle where road meets track

Item IV.7 records the smallest angle between the road and the track. It takes one of three ranges, not an exact figure: 0 to 29 degrees, 30 to 59 degrees, or 60 to 90 degrees. A road that crosses at a right angle is at 90 degrees. The lower the angle, the more the road runs alongside the track as it crosses it. For public highway crossings:

  • 0 to 29 degrees: 3,468 records (2.8 percent);
  • 30 to 59 degrees: 17,456 (14.0 percent);
  • 60 to 90 degrees: 84,744 (68.2 percent);
  • blank: 18,611 (15.0 percent).

So about two records in three describe a crossing close to a right angle, and fewer than three in a hundred the sharpest range.

Part III of the record counts the signs at the crossing. One of them is the Skewed Crossing sign, W10-12, in item III.2.D. The record notes whether the sign is present by giving a count. 455 records have a count above zero.

Lanes and direction of travel

Item IV.1 records how many traffic lanes cross the track and which way traffic moves. Most records list two lanes:

Traffic lanes crossing the track (IV.1), open public highway crossings at track level
LanesRecords
18,458
2103,588 (83.4 percent)
32,344
46,356
5 or 61,948
7 or more263
0 (not a valid value)949
Blank373

A crossing cannot carry a road with no lanes, so the 949 zeros are gaps in the record, not measurements. The direction of travel is a separate value: 91,115 records say two-way traffic, 1,221 one-way and 1,443 a divided road. The direction is blank on 30,500 records, about one in four (24.5 percent).

Paving, street lights and track in the street

Three short yes-or-no items describe the setting of the crossing.

  • Is the road paved? (IV.2) Yes on 97,025 records (78.1 percent), no on 26,850 (21.6 percent), blank on 404.
  • Is the crossing illuminated? (IV.4) The form means street lights within about 50 feet of the nearest rail. Yes on 30,939 (24.9 percent), no on 76,354 (61.4 percent), blank on 16,986 (13.7 percent).
  • Does the track run down a street? (IV.3) Yes on 3,283 (2.6 percent), no on 120,542, blank on 454. These are places where the track runs along the street rather than only across it.

Paving describes the road and the surface item the crossing, so the two can differ. Only 4,594 records give an unconsolidated crossing surface, while 26,850 say the road is not paved. So at least 21,772 records for unpaved roads list a surface type other than unconsolidated, such as timber or asphalt, at the crossing itself.

A road junction close by

Item IV.6 asks whether another road meets the crossing road within 500 feet of the track, and if so, how far away. Yes on 73,925 records (59.5 percent), no on 48,371, "Unknown" on 45 and blank on 1,938.

Of the 73,925 records that say yes, the distance is given as follows:

  • 1 to 50 feet: 8,383;
  • 51 to 100 feet: 16,325;
  • 101 to 200 feet: 8,015;
  • 201 to 500 feet: 7,012;
  • over 500 feet: 22, and 0 feet: 870 (neither fits the question);
  • blank: 33,298 (45.0 percent of the yes records).

Of the 39,735 records with a distance from 1 to 500 feet, 62.2 percent put the junction within 100 feet of the track.

Part III adds two related items. Item III.4.A asks whether the nearby intersection has highway traffic signals: yes on 9,190 records, no on 83,965, blank on 31,124. Item III.4.B records interconnection, using the values the dataset shows: for traffic signals on 4,863 records, for warning signs on 218, not interconnected on 92,704, and blank on 26,494. For what the crossing's own gates, lights and signs are, see the note on warning devices in the crossing inventory and the Rail Crossing Atlas guide on why some crossings have gates or lights.

The speed limit and its type

Item V.4 records the highway speed limit at the crossing. It is the road's limit, not the train's; the railroad side records a maximum timetable speed for trains in Part II. The form also records what kind of limit it is, with two options: posted or statutory. Posted on 77,925 records (62.7 percent), statutory on 21,531 (17.3 percent), and the type is blank on 24,823 (20.0 percent).

Highway speed limit at the crossing (V.4), open public highway crossings at track level
Speed limitRecords
1 to 15 mph2,731
16 to 25 mph26,195
26 to 35 mph40,596
36 to 45 mph13,107
46 to 55 mph18,189
56 to 65 mph741
Over 65 mph205
0 or below (not a valid value)2,083
Blank20,432

101,764 records give a valid limit. Of those, 68.3 percent are 35 mph or less, and 28,926 records are 25 mph or less. At the other end, 18,189 records give 46 to 55 mph and only 205 give more than 65 mph. The zeros and the blanks, together more than one record in six, cannot be read as any speed.

What kind of road it is

Part V places the road in three ways. First, the area: 71,265 records are rural (57.3 percent), 51,949 urban (41.8 percent) and 1,065 blank. Second, the road's functional class, given here in alphabetical order with the class labels as the form lists them. The classes are defined in the FHWA's guidance on highway functional classification.

Functional class of the road, open public highway crossings at track level, in alphabetical order
Functional classRecords
Interstate245
Local77,000 (62.0 percent)
Major collector20,897
Minor arterial12,011
Minor collector7,357
Other freeways and expressways168
Other principal arterial5,402
Blank1,199

Third, the highway system (V.1): Interstate system on 424 records, other National Highway System on 4,730, federal aid but not on the National Highway System on 27,849, non-federal-aid on 89,093 (71.7 percent), and blank on 2,183. Item V.3 then asks whether the road is on the state highway system: yes on 20,042 (16.1 percent), no on 103,585, blank on 652.

One caution. 245 records are coded with the interstate class and 424 with the Interstate system. The two fields do not agree with each other. Treat these as codes to check against a map and the record's location fields, not as a finding about interstate highways. Who looks after the road is the subject of the note on who looks after a crossing, and how to reach them.

Who uses the road

The last items in Part V say what traffic uses the road. One Part III sign adds a note on the road's profile.

  • School bus route. Yes on 36,302 records (29.2 percent), no on 86,586, blank on 1,391.
  • Emergency services route. Yes on 8,380, no on 42,746, and blank on 73,153 (58.9 percent). Most records do not answer this item, so the yes count is a floor, not a total.
  • Estimated percent trucks. Filled on 120,988 records (97.4 percent); its values are not summarized here.
  • Low ground clearance sign, W10-5 (III.2.E). Yes on 19,502 records (15.7 percent), no on 85,574, blank on 19,203. The sign has its own section, 8B.16, in Part 8 of the Manual on Uniform Traffic Control Devices, 11th edition.

For the road's traffic count (V.7) and how old it is, see the note on reading a crossing record.

Reading the road fields well

Six habits help.

  • Blank is not "no". The emergency route item is blank on more than half the records, so a missing yes proves nothing.
  • Optional fields are rarely filled. The surface installation year is on fewer than seven records in a hundred. Do not expect the record to date the surface.
  • Zeros and odd values are gaps. Zero lanes, a zero speed limit or an installation year of "1" are not measurements; count them as their own group.
  • Fields can disagree. The interstate class and the Interstate system are filled in separately, and their counts differ.
  • Check the revision date. A record revised long ago may describe a road that has since been widened, paved or relit.
  • Ask when it matters. Each record names a state contact. The note on who looks after a crossing explains who that is and when to call.

Rail Crossing Atlas maps the same records: see its railroad crossings by state, its guide to the FRA crossing inventory and its data and method page. The note on how the U.S. railroad crossing inventory is kept explains who keeps each record current. To read one crossing's road fields, search the FRA dataset on data.transportation.gov by DOT number.

Sources

Figures are as the source showed them on the date given. Rail Crossing Atlas figures come from the FRA crossing inventory of the date stated in the text.

  1. Form FRA F 6180.71 (Rev. 3/15): the U.S. DOT Crossing Inventory Form and its instructions (FRA). Read 19 November 2026.
  2. Crossing Inventory Data, Current: the FRA dataset and its column descriptions on data.transportation.gov. Read 19 November 2026.
  3. 49 CFR 234.411: changes that must be reported within three months (Cornell Legal Information Institute). Read 19 November 2026.
  4. FHWA: Highway Functional Classification Concepts, Criteria and Procedures. Read 19 November 2026.
  5. Manual on Uniform Traffic Control Devices, 11th edition, Part 8: Traffic Control for Railroad and Light Rail Transit Grade Crossings (FHWA). Read 19 November 2026.
  6. Rail Crossing Atlas guide: why some crossings have gates or lights. Read 19 November 2026.
  7. Rail Crossing Atlas: railroad crossings by state. Read 19 November 2026.
  8. Rail Crossing Atlas guide: the FRA crossing inventory explained. Read 19 November 2026.
  9. Rail Crossing Atlas: data and method. Read 19 November 2026.

More notes

All 13 notes
  1. Published 8 min read

    U.S. railroad crossings by railroad class

    The federal railroad classes, how the crossing inventory records them, and counts of open crossings by class, by type and by Class I parent.

Look this up in Rail Crossing Atlas

Every U.S. crossing record, state by state, from the FRA inventory. Public records need no account.

Open Rail Crossing Atlas